1 lights, 2 buttons – Rice Lake Datamax-ONeil M-Class User Manual

Page 26

M-Class

4.1 Lights

Normal Mode

(Normal power-up)

STOP

Solid On: Indicates the printer is in the ‘Paused’ state

Flashing: (When using the Peel & Present Option) Indicates
a label is presented to the operator.

Indicates a top of form or mechanical error has occurred

Solid On: Indicates the printer is on and ready for printing

Flashing: Indicates the printer is receiving data from the host

ERROR

READY

Both the READY

and

STOP Lights will be on during power-up initialization and a warm reset.

4.2 Buttons

The three buttons,

PAUSE ,

FEED , and

CANCEL perform different functions based on the printer’s

operational mode. The printer operates in one of the following modes:

Normal:

Normal printer functions. See Section 4.3.

Express Setup:

Allows quick access to the most common printer settings, (Sensor Type, Media Type, and Option Control. See
Section 4.4.

Printer Setup:

Allows changes to the printer’s operational settings. See Section 4.5.

Calibration:

Allows the ‘calibration’ of the media being used for the correct sensing of the top of form. See Section 4.7.