Rice Lake Datamax-ONeil M-Class - Manual (Page 152)

144 M-Class
Download the generated files to the printer – one method is the DOS copy command:
copy small.ls lpt1: /b
Reset the printer by pressing and holding the CANCEL Key for approximately four seconds.
Verify the operation by printing a Configuration Label (see Section 5.3.2) The new font selection will be printed on the
label under SYSTEM INFORMATION / OPTIONAL LANGUAGES or select the new language in the SYSTEM
SETTINGS / MENU LANGUAGE in the printer’s menu.
This is the only method to determine whether the download was successful. If the menu system displays the new
language selection, but all displayed messages remain in English an error has occurred. Re-check the process. Contact
Datamax Technical Support if problems continue (be prepared to provide the Gemmsglst.xls and the DPL download
file that you have created). Other possible error messages are as follows:
Menu Language Error
Message
Description
Please select the entire
column(s) or the desired
language(s), by clicking on the
column letter(s) After pressing the Generate
DPL File(s) radio button, the
languages to convert were not
correctly selected.
Message text may not exceed
MAX = xx designated
characters for this MID The entered message exceeds the
number of characters specified
in column C. You may not
modify this number.