Rice Lake MSI-3460 Challenger 3 - Manual (Page 29)

Configuration 25
4.9 Filter Setup
Changing the filter settings allows the scale to adjust to situations where there is a lot a
movement in the structure. If the reading is not stable, it can often be improved by
increasing the filter setting. Settling time will be longer as the filter setting is increased.
However, the
MSI-3460
employs algorithms that speed up large weight changes while
still controlling vibration even with high filter settings.
1) With the 3460 off, press and hold
the USER key, then press the
POWER key.
...or while the 3460 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is Func1. Scroll to Filtr with
the
USER key.
3) To setup the filter, press TARE .
The display will blink the current
filter setting.
4) Change the filter setting by
pressing the USER key.
There are four available filter settings.
Not all choices are shown in this
example.
5) When the desired filter setting is
displayed, press TARE . The
next item in the setup menu
appears.
6) Either press ZERO to exit setup
and store all changes, or
continue to another setup menu
item using the
USER key.
)YQF
+L
High Filter 1
TARE
USER
F
POWER
Hold
USER
F
2))
Blinking
USER
F
ZERO
Store and return to
weight display
Cancel all setup
changes
)LOWU
USER
F
2))
Blinking
USER
F
/2
Low Filter, Blinking
USER
F
8QLW
Next Setup Menu Item
TARE
Filter Setup
POWER
Figure 4-9. Filter Setup Menu Map