Rice Lake MSI-3460 Challenger 3 - Manual (Page 24)

20 MSI-3460 Operator’s Manual
4.5 Display Brightness
The display setup menu is used to set the display brightness. There are four fixed
brightness settings, and one automatic light sensing brightness setting. The auto
setting will automatically detect the ambient light and adjust the brightness of the
display accordingly. Bright light will cause the display to be at the brightest setting.
The display brightness will reduce as ambient light reduces. The four fixed brightness
settings, LO-1, LO-2, HI-1, and HI-2 change the average current in the display.
Lower settings increase battery life.
1) With the 3460 off, press and hold
the USER key, then press the
POWER key.
...or while the 3460 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is Func1. Scroll to diSPL with
the
USER key.
3) To set up the display brightness,
press TARE . The current
brightness setting is displayed.
4) Select the display brightness by
scrolling through the choices with
the
USER key. The menu
brightness changes as you scroll
through the choices.
In this example, we’ll set the brightness
to the AUTO, light sensing brightness
control.
5) When the desired display
brightness setting is displayed,
press
TARE . The next item in
the Setup Menu appears.
6) Either press ZERO to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
USER key.
Display Brightness Setup
)YQF
+L
6/((3
Next Setup Menu Item
TARE
TARE
USER
F
POWER
Hold
USER
F
/R
dimmest setting
USER
F
$YWR
USER
F
ZERO
Cancel all setup
changes
+L
USER
F
medium high setting
light sensing auto setting
brightest setting
GLVS/
USER
F
/R
USER
F
medium low setting
Store and return to
weight display
6WRUH
POWER
Figure 4-5. Display Brightness