Rice Lake Motorola DS457 Laser Scanner - Manual (Page 322)

13 - 6 DS457 Fixed Mount Imager Integration Guide
FN1 Substitution Values
Key Category Parameter # 67h
Decimal Value Parameter # 6Dh
The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. When enabled any FN1
character (0x1b) in an EAN128 bar code is substituted with a value. This value defaults to 7013 (Enter Key).
When using host commands to set the FN1 substitution value, set the key category parameter to 1, then set
the 3-digit keystroke value. See the ASCII Character Set table for the currently installed host interface for the
desired value.
To select a FN1 substitution value via bar code menus:
1.
Scan the bar code below.
2.
Look up the keystroke desired for FN1 Substitution in the ASCII Character Set table for the currently
installed host interface. Enter the 4-digit ASCII Value by scanning each digit in
Appendix D, Numeric Bar
Codes
.
To correct an error or change the selection, scan
Cancel
.
Scan Data Transmission Format (continued)
(05h)
(06h)
(07h)
Set FN1 Substitution Value