Rice Lake Motorola DS457 Laser Scanner - Manual (Page 236)

12 - 14 DS457 Fixed Mount Imager Integration Guide
User-Programmable Supplementals
Supplemental 1: Parameter # F1h 43h
Supplemental 2: Parameter # F1h 44h
If you selected a Supplemental User-Programmable option from
Decode UPC/EAN/JAN Supplementals on
page 12-11
, select
User-Programmable Supplemental 1
to set the 3-digit prefix. Then select the 3 digits
using the numeric bar codes in
Appendix D, Numeric Bar Codes
. Select
User-Programmable Supplemental
2
to set a second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning in
Appendix D,
Numeric Bar Codes
.
UPC/EAN/JAN Supplemental Redundancy
Parameter # 50h
With
Autodiscriminate UPC/EAN/JAN Supplementals
selected, this option adjusts the number of times a
symbol without supplementals is decoded before transmission. The range is from two to thirty times. Five or
above is recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals, and
the autodiscriminate option is selected. The default is set at 10.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in
Appendix D,
Numeric Bar Codes
. Single digit numbers must have a leading zero. To correct an error or change a selection,
scan
Cancel
on
page D-3
.
User-Programmable Supplemental 1
User-Programmable Supplemental 2
UPC/EAN/JAN Supplemental Redundancy