Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.0 - Manual (Page 76)

70 Counterpart User Manual
Command Description
Supported Ticket
Formats
Gross weight in displayed units GFMT, NFMT, TOTALFMT,
PALFMT, CFMT, ACCFMT
HDRFMT1, HDRFMT2
Net weight in displayed units
Tare weight in displayed units. Add four before bracket to print header
Accumulated weight in displayed units
Number of accumulator events (5-digit counter)
Date of last accumulator event
Time of last accumulator event
Unit ID number
Consecutive number
Piece count, current scale
Piece count, scale n
nn> New line (nn = number of termination ( or ) characters)*
nn> Space (nn = number of spaces)*
Suppress Units. Toggle weight data format (formatted/unformatted)**
Time
Date
Time & Date
Header 1
Header 2
Loaded ID Code - 32 characters maximum
Loaded ID Description - 32 characters maximum
Loaded ID Location - 12 characters maximum
Loaded ID Part Number - 32 characters maximum
Loaded ID Lot - 32 characters maximum
Loaded ID Units - 1 character maximum
Loaded ID Tare - 9 characters maximum (range 0.0 to 9999999.0)
Loaded ID Unit Weight - 9 characters maximum (range 0.0 to 9999999.0)
Loaded ID Quantity - 11 characters maximum (range -2000000000 to 2000000000)
Piece Count, current scale - 7 characters maximum (no explicit maximum value)
Piece Count, Scale n
Totalization Value - 11 character maximum (range -2000000000 to 2000000000). When not in
totalization mode, the value will be 0.
Totalization Count - 4 characters maximum. When no in totalization mode, the value will be 0.
Transaction Type - gives a “1” for receiving (in) or “0” for (sending out)
Note: This command cannot be used in any other format except Weighvault
Print totalized weight. When not in totalization mode, the value will be 0.
Setpoint captured weight value SPFMT
Setpoint weight number
Setpoint target weightvalue
Setpoint preact weight value
Setpoint weight mode
Setpoint captured count value
Setpoint target count value
Setpoing preact count value
Table 7-1. Print Format Commands