Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.0 - Manual (Page 46)

40 Counterpart User Manual
Level 3 Submenu
SP CFG SETPT 1
SETPT 2-6 Specifies the settings for gross,net, piece count, % rel, delay, waitss, counter and
inmotion used by setpoints 1 through 6.
BATCHING OFF
AUTO
MANUAL Batching enable. Set to AUTO or MANUAL to allow a batch sequence to run. MANUAL
requires a Batch Start softkey before the batch sequence can run. AUTO allows batch
sequences to repeat continuously.
Level 4 Submenu
SETPT1 OFF
GROSS
NET
PIECECNT
%REL
DELAY
WAITSS
COUNTER
INMOTION Specifies the setpoint kind.
GROSS, NET, PIECECNT, and %REL setpoint kinds can be used as either batch or
continuous setpoints. DELAY, WAITSS, and COUNTER setpoint kinds can only be used in
batch sequences.
The INMOTION setpoint kind can only be used as a continuous setpoint.
SETPT 2-6 SAME AS
SETPT 1
Level 5 Submenu
OFF Value=number
GROSS
NET
PIECECNT
%REL Value
Source
Trip
Bandval
Hyster
Preact
Preval
Preadj
Prestab
Pcount
Relnum
Batch
Pshaccm
Pshprint
Pshtare
Access
Digout
Sense Display and edit the gross value
DELAY Value
Source
Pshaccm
Pshprint
Pshtare
Access
Digout
Sense
Table 3-8. Setpoints Menu Parameters