Rice Lake Condec 3030 - Manual (Page 3)

1. Introduction
The CONDEC 3030 is designed to be a simple to use yet very
versatile pressure calibrator. Its two internal pressure sensors, P1 and
P2 ports, combined with inputs for mA, voltage, switch contacts and
an RTD probe allow the CONDEC 3030 to calibrate virtually any
pressure device. An external pressure module option allows an even
wider range of pressure calibration options including absolute and
differential.
1.1 Customer Service
Corporate Office:
Rice Lake Weighing Systems - CONDEC Products
230 West Coleman Street
Rice Lake, WI 54868
Pressure Products Calibration Lab:
Rice Lake Weighing Systems - CONDEC Products
3 Simm Lane
Door D, Unit 2A
Newtown, CT 06470
Tel: (888) 295-8475
Fax: (203) 364-1556 or (715) 234-6967
web site: www.4condec.com
e-mail: [email protected]
1.2 Standard Equipment
Check to see if your calibrator is complete. It should include:
CONDEC 3030 Calibrator, instruction manual, test leads, carrying
case, calibration certificate with data.
1.3 Safety information
Symbols Used
The following table lists the International Electrical Symbols. Some or
all of these symbols may be used on the instrument or in this
manual.
1