Rice Lake CB-2 Concrete Batch Controller Version 1.0 - Manual (Page 32)

28 CB-2 Automated Concrete Batching System Installation/Operation Manual
Locations You have the ability to Add, Copy, Change, Delete or Exit
Level 4 Sub-menu ADMIN MENU/APPLICATION PARAMETERS/DATABASES/LOCATIONS
Location ID Store
Change Enter in the bin/silo ID location. Press Store to keep that value or press
Change to change the value to a different one.
Name Store
Change Enter in the bin/silo name/description. Press Store to keep that value or press
Change to change the value to a different one.
Material Store
Material Enter in the material code. Press Store to keep that value or press Material to
change the material to a different one.
Delivery Mode Change
Store Enter in the delivery mode. Press Store to keep that value or press Change to
change the delivery mode to a different one.
1 - Single Speed
Secondary Mode Off
On Continuous Aeration
No Flow Aeration
Continuous Vibrator
No Flow Vibrator
Scale Store
Scale Enter in the scale. Press Store to keep that value or press Scale to change
the scale to a different one.
Fast Feed Gate Change Enter New Fast Feed Gate number.
Aerator Change Select to change aerator.
Feed Gate Limit Switch Change Select ot change the feed gate limit switch.
Fast Feed SP Store
Change Select to change the set point number that is used for fast filling.
Moisture Probe ID Store
Change Is a meter used to determine the moisture content of aggregates.
Press Store to keep the current parameter, or press Change to change the ID
and then press enter to save the new parameter.
Probe Mode No Probe
Static Only
Static Flow
Flow Only Moisture compensation mode.
Total Moisture Store
Change Enter in the total moisture. Press Store to keep that value or press Change to
change the total moisture value to a different one.
Scales Select or Enter scale number. 1-Agg, 2-Cement
Level 4 Sub-menu ADMIN MENU/APPLICATION PARAMETERS/DATABASES/SCALES
Scale Number Store
Change Enter in the scale number. Press Store to keep that value or press Change to
change the scale number to a different one.
Name Store
Change Enter in the name/description of the scale. Press Store to keep that value or
press Change to change the name to a different one.
Capacity Store
Change Enter in the capacity of the scale. Press Store to keep that value or press
Change to change the capacity of the scale to a different one.
Zero Tolerance Band Store
Change Enter in the zero tolerance band. Press Store to keep that value or press
Change to change the value of the zero tolerance band to a different one.
Cleanout Time Store
Change Enter the cleanout amount time in seconds. Press Store to keep that value or
press Change to change the cleanout time to a different one.
Close Time Store
Change Enter the Close Time amount time in seconds. Press Store to keep that value
or press Change to change the close time to a different amount.
Discharge Delay Store
Change This is the amount of time the system waits before starting the first admixture
discharge. To change the amount of time (sec.), enter a new numeric value
and press the
enter button to save the value.
Start Discharge % Full Store
Change Enter the discharge percent for the cement scale. Press Store to keep that
value or press Change to change the percent to a different amount.
ADMIN Menu
Parameter Choices Description