Rice Lake CB-2 Concrete Batch Controller Version 1.0 - Manual (Page 29)

Configuration of User Parameters 25
Enable Mixer Controls No
Yes Select Yes if your system has a mixer and you want the CB-2 to control it.
Continuous Batching No
Yes Select Yes for continuous batching to occur. Continuous batching will repeat
the same mix and quantity until the ‘Last Batch’ softkey is pressed.
Global Mix Time Enter the amount of time in seconds the mixer should run
Auto Discharge Mixer No
Yes Select Yes to have the CB-2 discharge the mixer.
Mixer Discharge Time Seconds Enter the amount of time in seconds that the CB-2 should discharge the
mixer to ensure it is emptied completely.
Ticket/Reports Setup
Level 4 Sub-menu ADMIN MENU/APPLICATION PARAMETERS/TICKETS & REPORTS SETUP
Print Ticket Number No
Yes Select Yes to print the ticket number of the batch ticket.
# Line Feeds Enter the number of lines that should be fed to achieve the correct starting
position.
Header Text Lines Header Line 1 Left
Header Line 1 Right
Header Line 2 Left
Header Line 2 Right
Header Line 3 Left
Header Line 3 Right
Header Line 4 Left
Header Line 4 Right
Header Line 5 Left
Header Line 5 Right
Header Line 6 Left
Header Line 6 Right Allows the user a total of 6 header lines in which to place text at the top of the
batch ticket (maximum of 60 characters per line). To change, press the
Change softkey and enter the new header line.
Plant Number Enter numeric plant number
Print Customer & Job Site No
Yes Select Yes to print the customer and job site on the ticket.
Print Instructions /Notes No
Yes Select Yes to print any instructions and notes on the ticket.
Print Driver Name No
Yes Select Yes to have the drivers name attached to the printed ticket
Print Price No
Yes Select Yes to print the price per ... on to the printed ticket
Print Slump No
Yes Select Yes to print the slump on the printed ticket.
Print Job ID/Bridge # No
Yes Select Yes to print the job ID on the printed ticket.
Body Text Lines Body Line 1 Left
Body Line 1 Right
Body Line 2 Left - up to 6
Right Allows the user a total of 6 body lines in which to place the text in the middle
of the batch ticket (maximum of 60 characters per line). To change, press the
Change softkey and enter the new body line.
Batch Weights on Ticket None
Load Totals
Individual Batches Select for individual batch/load totals on the printed ticket.
Print Water/Cement Ratio No
Yes Select Yes to print the ratio of water to cement on the printed ticket.
Print Time Loaded No
Yes Select Yes to print the time loaded on the printed ticket.
ADMIN Menu
Parameter Choices Description
Table 4-1. Application Parameters Sub-menu List