Rice Lake 920i Installation Manual V1.05 - Manual (Page 55)

Print Formatting 51
6.3.3 Using Serial Commands
With a personal computer, terminal, or remote keyboard attached to one of the 920i serial ports, you can use the
serial command set described in Table 6-1 on page 47 to customize the print format strings.
To view the current setting of a format string, type the name of the print format and press the enter key. For
example, to check the current conÞguration of the GFMT format, type GFMT.FMT and press enter . The
indicator responds by sending the current conÞguration for the gross format:
GFMT.FMT= GROSS
To change the format, use the GFMT.FMT or NFMT.FMT serial command followed by an equals sign (=) and
the modiÞed print format string. For example, to add the name and address of a company to the gross format, you
could send the following serial command:
GFMT.FMT=MOE'S DUMP2356 EAST HIGHWAY ROADSMALLTOWN GROSS
A ticket printed using this format might look like the following:
MOE'S DUMP
2356 EAST HIGHWAY ROAD
SMALLTOWN
1345 LB GROSS
The ticket above could also be formatted by specifying the company address information in the HDRFMT1
ticket format, then substituting the
HDRFMT1=MOE'S DUMP2356 EAST HIGHWAY ROADSMALLTOWN
GFMT.FMT=