Oldcastle BuildingEnvelope Reliance StormMax High Performance - Manual (Page 28)

February 2014 26-Interior-Seals-Wet-Glazed 1-866-Oldcastle (653-2278) www.oldcastlebe.com
3.6 a. Clean all silicone surfaces and joints with 50% isopropyl alcohol and wipe clean.
b. Apply painter's tape to the mullion and glass as shown in FIGURE 3.6
c. Apply Dow Corning 995 or Tremco Proglaze II structural silicone sealant into pocket between the
mullion and the glass starting from the bottom and work towards the top. Be sure to use positive
pressure to completely fill the pocket and prevent voids in sealant.
d. Use a proper implement to tool the silicone sealant smooth immediately after running the bead.
e. Remove painter's tape after tooling and before silicone sealant skins over.
WW-1328 Face Cap
FS-325 Fastener
GP-107 Isolator
GP-165 Gasket
GP-165 Gasket
Painter's Tape
FIGURE 3.6
Glazing Instructions
5/16" Weep Hole
INTERIOR SEALING FOR WET GLAZED APPLICATIONS
(4) FS-9 #14 x 1-1/2" HH
FS-325 AS REQUIRED
FG-5185 Spacer Gasket
With Dow Corning 995 or Tremco Proglaze II
HW-163 Pressure Plate
5/16" Weep Hole
RELIANCE STORMMAX HIGH PERFORMANCE INSTALLATION MANUAL