Oldcastle BuildingEnvelope Reliance StormMax High Performance - Manual (Page 13)

February 2014 11-Pressure-Plate-Fab 1-866-Oldcastle (653-2278) www.oldcastlebe.com
FIGURE 1.6b
GP-165 Gasket Notching
1.6 con't e. Cut GP-165 Gasket to D.L.O. plus 1/4" for relaxation on horizontal members.
Cut "V" Notch at gasket quarter points See FIGURE 1.6b
HORIZONTAL PRESSURE PLATE FABRICATION
Cut out (2) 1/2" X 3/8" "V" Notch
Locate notch at 1/4 points of gasket
to align with HW-163 Pressure Plate weep holes.
1/2" 1/2"
3/8"
RELIANCE STORMMAX HIGH PERFORMANCE INSTALLATION MANUAL