Oldcastle BuildingEnvelope Reliance StormMax High Performance - Manual (Page 17)

February 2014 15-Horizontal-Installation 1-866-Oldcastle (653-2278) www.oldcastlebe.com
HORIZONTAL MEMBER INSTALLATION CONTINUED
Adequate sealant should
be applied in track of shear
block to allow sealant
to force through holes
in horizontal.
Sealant should form a seal
around and beneath
attachment fastener.
If sealant does not
form complete seal around
screw head, the fastener
should be cap sealed
to insure a proper seal.
FS-118 (2) per Shear Block
FIGURE 2.1b
Shear Block Sealing
RELIANCE STORMMAX HIGH PERFORMANCE INSTALLATION MANUAL