Kontron X9SCL+-F - Manual (Page 80)

4-8
X9SCM/X9SCM-F/X9SCL/X9SCL-F/X9SCL+-F

North Bridge Configuration
This item displays the current North Bridge Revision.
VT-d
Select Enabled to enable Intel's Virtualization Technology support for
Direct I/O VT-d
by reporting the I/O device assignments to VMM through
the DMAR ACPI Tables. This feature offers fully-protected I/O resource-
sharing across the Intel platforms, providing the user with greater reliabil-
ity, security and availability in networking and data-sharing. The settings
are Enabled and
Disabled.
Active State Power Management
Select Enabled to start Active-State Power Management for signal
transactions between L0 and L1 Links on the PCI Express Bus. This
maximizes power-saving and transaction speed. The options are Enabled
and
Disabled.
PCIE Maximum Payload Size
This feature selects the setting for the PCIE maximum payload size. The
options are
Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048
Bytes, and 4096 Bytes .
PCI Express Port
This feature enables or disables the PCI Express port. The options are
Disabled, Enabled and
Auto.
PEG Force Gen1
This feature forces Gen1 support on the PCI Express Graphics (PEG)
port. The options are
Disabled, and Enabled.
Detect Non-Compliant Device
This feature enables or disables the detection of a non-compliant device
that is attached to the PCI Express Graphics (PEG) port. The options are
Disabled, and Enabled.

South Bridge Configuration
This item displays the current South Bridge Revision.
GbE Controller
Select Enabled to enable the onboard gigabit Ethernet controller. The
settings are
Enabled and Disabled.