Kontron X9SCL+-F - Manual (Page 104)

4
X9SCM/X9SCM-F/X9SCL/X9SCL-F/X9SCL+-F User's Manual
8. When a DOS prompt appears, type AMI.BAT BIOSname.### at the prompt.
Note: Do not interrupt this process until BIOS flashing is completed.
9. After seeing the message that BIOS update is completed, unplug the AC
power cable to clear CMOS, and then plug in the AC power cable to power
on the system.
10. Press continuously to enter the BIOS Setup utility.
11. Press to load default settings.
12. After loading default settings, press to save the settings and exit the
BIOS Setup utility.