Kontron ETX-DC - Manual (Page 76)

ETX-DC®/ BIOS Operation
71
North Bridge Configuration
Feature Option Description
DRAM Frequency AUTO
400MHz
500 MHz Selects the DRAM Frequency
Configure DRAM Timing by SPD Disabled
Enabled Enables or disables the SPD EEPROM
DRAM configuration
Memory Hole Disabled
15MB-16MB Disables or enables the extended
memory hole on ISA bus
Graphic Device Priority PCI/IGD
IGD Selects the graphic device priority
Internal Graphics Mode Select Enabled 8MB
Disabled
Enabled 1MB Selects the amount of system memory
used by the internal graphics device
Chipset Thermal Throttling Disabled
Enabled Disables or enables chipset thermal
throttling
DT in SPD Disabled
Enabled Disables or enables the delta
temperature in SPD thermal
management algorithm as specified by
JEDEC
TS on DIMM Disabled
Enabled Disables or enables the thermal sensor
on DIMM thermal management
functionality as specified by JEDEC
DMI PM Disabled
Enabled Disables or Enables DMI/FSB power
management. If disabled, PCI
performance will improve slightly.