Kontron ETX-DC - Manual (Page 68)

ETX-DC®/ BIOS Operation
63
Remote Access Configuration Menu
Feature Option Description
Remote Access Enabled
Disabled Disables and Enables the AMI Remote
Access feature. It has no influence in
JRC connection.
Serial port number COM1
COM2 Only enabled COMports while bootup are
supported
Serial Port Mode 115200 8,n,1
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1 Selects the speed of the connection
Flow Control None
Hardware
Software Selects the flow control mode
Redirection After BIOS Post Disabled
Boot Loader
Always Turns off redirection after POST
Active during POST and boot loader
It is always active
Terminal Type ANSI
VT100
VT-UTF8 Selects the target terminal type
VT-UTF8 Combo Key Support Enabled
Disabled Enable/Disable VT-UTF8 Combination
Key Support for ANSI/VT100 terminals
Sredir Memory Display Delay No Delay
Delay 1 Sec
Delay 2 Sec
Delay 4 Sec Selects the delay to display memory
information
Terminal Size 80x24
80x25 Selects terminal size type