Kontron ETX-DC - Manual (Page 55)

ETX-DC®/ BIOS Operation
50
IDE Configuration Menu
Feature Option Description
ATA/IDE Configuration Disabled
Compatible
Enhanced Disables or selects the mode for the
ATA/IDE interface
Legacy IDE Channels (Only when
Compatible) SATA only
Reserved
SATA Pri, PATA Sec
PATA only Selects the IDE channel behavior in
compatible mode
Configure SATA as (Only when Enhanced) IDE
AHCI Selects the SATA mode in compatible IDE
mode
Configure SATA channels (Only when
Enhanced) Before PATA
Behind PATA Configures when the SATA controller is
initialised
Hard Disk Write Protect Disabled
Enabled Enables and Disables the Hard Disk Write
Protection which only works, when the
HDD is accessed through BIOS
SpeedStep Enabled
Disabled Enables and Disables the Speed Stepping
Feature
IDE Detect Time Out (Sec) 0
5
..
35 Selects the time for the IDE Detect Time
Out in seconds
ATA(PI) 80 Pin Cable Detection Host & Device
Host
Device Selects the mechanism for detecting
ATA(PI) 80 pin cable
Secondary PATA Enabled
Disabled Enables and Disables the secondary IDE
channel