beautypg.com

2 software support / hardware abstraction, 3 document and standards references, 1 external industry standard documents – Kontron SMARC-sAT30 User Manual

Page 9: Software support / hardware abstraction, Document and standards references, External industry standard documents

background image

User’s Guide

www.kontron.com

9







2.2

Software Support / Hardware Abstraction

The Kontron sAT30 Module is supported by Kontron BSPs (Board Support Package). The first sAT30 BSP targets Linux

support and is available under Kontron part number 771-242-00. BSPs for other operating systems are planned. Check

with your Kontron contact for the latest BSPs.

This manual goes into a lot of detail on I/O particulars – information is provided on exactly how the various SMARC

edge fingers tie into the NVIDIA SoC and to other Module hardware. This is provided for reference and context. Most of

the I/O particulars are covered and abstracted in the BSP and it should generally not be necessary for sAT30 users to

deal with I/O at the register level.

2.3

Document and Standards References

2.3.1 External Industry Standard Documents

»

CSI-2 (Camera Serial Interface version 2) The CSI-2 standard is owned and maintained by the MIPI Alliance

(Mobile Industry Processor Alliance) (

www.mipi.org

).

»

D-PHY CSI-2 physical layer standard – owned and maintained by the MIPI Alliance (

www.mipi.org

).

»

eMMC (Embedded Multi-Media Card) the eMMC electrical standard is defined by JEDEC JESD84-B45 and the

mechanical standard by JESD84-C44 (

www.jedec.org

).

»

GbE MDI (Gigabit Ethernet Medium Dependent Interface) defined by IEEE 802.3. The 1000Base-T operation

over copper twisted pair cabling is defined by IEEE 802.3ab (

www.ieee.org

).

»

HDMI Specification, Version 1.3a, November 10, 2006 © 2006 Hitachi and other companies (

www.hdmi.org

).

»

The I2C Specification, Version 2.1, January 2000, Philips Semiconductor (now NXP) (

www.nxp.com

).

»

I2S Bus Specification, Feb. 1986 and Revised June 5, 1996, Philips Semiconductor (now NXP)

(

www.nxp.com

).

»

JTAG (Joint Test Action Group) defined by IEEE 1149.1-2001 - IEEE Standard Test Access Port and Boundary

Scan Architecture (

www.ieee.org

).

»

MXM3 Graphics Module Mobile PCI Express Module Electromechanical Specification, Version 3.0, Revision

1.1, © 2009 NVIDIA Corporation (

www.mxm-sig.org

).

»

PICMG

®

EEEP Embedded EEPROM Specification, Rev. 1.0, August 2010 (

www.picmg.org

).

»

PCI Express Specifications (

www.pci-sig.org

).

»

Serial ATA Revision 3.1, July 18, 2011, Gold Revision, © Serial ATA International Organization (

www.sata-

io.org

).

»

SD Specifications Part 1 Physical Layer Simplified Specification, Version 3.01, May 18, 2010, © 2010 SD

Group and SD Card Association (Secure Digital) (

www.sdcard.org

).

»

SPDIF (aka S/PDIF) (Sony Philips Digital Interface) - IEC 60958-3.

»

SPI Bus – “Serial Peripheral Interface” – de-facto serial interface standard defined by Motorola. A good

description may be found on Wikipedia (

http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus

).

»

USB Specifications (

www.usb.org

).