Smarc sat30 general functions, Smarc sat30 feature set, 2 smarc sat30 general functions – Kontron SMARC-sAT30 User Manual
Page 12
User’s Guide
12
3.2
SMARC sAT30 General Functions
This section lists the complete feature set supported by the SMARC sAT30 module.
3.2.1 SMARC sAT30 Feature Set
The following table summarizes the SMARC features implemented on the sAT30, vs. the maximum possible allowed in
the SMARC specification. All mandatory features required by the SMARC specification are implemented in the
sAT30 Module.
SMARC Feature specification
SMARC Specification
Maximum Number
Possible
SMARC sAT30 Feature
support
SMARC sAT30 Feature
support instances
LVDS Display support
1
Yes
1
Parallel LCD support
1
Yes
1
HDMI Display support
1
Yes
1
CSI Camera support (Dual and
Quad lanes)
2
Yes
2 (Both support dual
lane only; Quad lane is
not supported)
Parallel Camera support
2
No
0
USB Interface
3
Yes
3
PCIe Interface
3
Yes
2
SATA Interface
1
Yes
1
GbE Interface
1
Yes
1
SDIO Interface
1
Yes
1
SDMMC Interface
1
Yes (4-bit is used)
1
SPI Interface
2
Yes
2
I2S Interface
3
Yes
3
I2C Interface
5
Yes
5
CAN
2
No
0
AFB
1
No
0
I/O Voltage (1.8V) level support
Yes
I/O Voltage (3.3V) level support
No