Kontron COMe-cOHXX - Manual (Page 19)

Kontron COMe-cOH2/COMe-cOH6 User’s Guide
www.kontron.com
14
Power Consumption in
[W]
Windows Desktop (idle) TBD
TAT at maximum power
configuration
TBD
S3 with Wake-on-LAN
disabled
TBD
S5 with Wake-on-LAN
disabled
TBD
NOTE: It is difficult to test for all possible applications on the market.
There may be an application that draws more power from the CPU than the
values measured in the table above. Take this into consideration if you
are at the limit of the thermal specification, in which case you should
consider improving your thermal solution.
3.5 Environmental Specifications
3.5.1 Temperature
Operating: (with Kontron heat spreader plate assembly):
» Ambient temperature: 0 to 70°C
» Maximum heat sink temperature: 0 to 70°C* (without a fan on the 9W APU
SKUs)
» Non-operating: -30 to +85°C
NOTES: *1) The maximum operating temperature with the heat spreader
plate installed is the maximum measurable temperature on any spot on
the heat spreader surface. You must maintain the temperature according
to the specification above.
Operating (without Kontron heat spreader plate assembly):
» Maximum operating temperature: 0-60°C
» Non operating: -30°C to +85°C
NOTE: **The maximum operating temperature is the maximum measurable
temperature on any spot on the module surface. You must maintain the
temperature according to the specification above.