Kontron COMe-cOHXX - Manual (Page 10)

Kontron COMe-cOH2/COMe-cOH6 User’s Guide
www.kontron.com
5
» LVDS 18-bit single channel
» Gigabit Ethernet LAN
» Serial ATA (SATA)
» PCI Express*
» SPI Bus
» USB 2.0
» LPC (Low Pin Count) bus
» Watchdog timer (WDT)
» GPIO
» I 2 C
» Intel® High Definition Audio (HDA)
The secondary connector (Row C and Row D) supports the following buses and
I/O:
» DP/DVI/HDMI
» PCI Express
NOTE: For full descriptions of the COM Express Type 6 pin-outs, refer to the
PICMG documentation that can be obtained from the PICMG website.
2.4 COM Express® Documentation
This product manual serves as one of three principal references for this COM
Express® module design. It documents the specifications and features of the
COMe-cOH# COM. The other two references, which are available from your
Kontron support representative or from PICMG, include:
» The PICMG COM Express® Specification, R2.0, which defines the COM Express®
module form factors, pin-outs, and signals. This document can be obtained
by filling out the order form on the PIGMG website at http://www.picmg.com
.
» The PICMG COM Express® Design Guide, which serves as a general guide for
baseboard design, with a focus on maximum flexibility to accommodate a wide
range of COM Express® modules. This guide is on the PICMG website at
http://www.picmg.com .
2.5 COM Express® COM Benefits
Compact form factor (95 x 95 mm) Computer-on-Module Express (COM Express)
modules are very compact, highly integrated computers that use either the
Type 2 or Type 6 COM Express® connector pin-outs. All microETXexpress®