Kontron COMe-bP5020 - Manual (Page 52)

www.kontron.com 52
User Guide
COMe-bP5020
Table 46: sconf Command
sconf
Provides functions for conf iguration of external interfaces
SYNTAX:
sconf info|select |set [ ]|status|save|undo
sconf command
info option:
displays available conf igurations
select option:
selects base conf iguration
parameter: text string (decimal)
<0, 1, ... n>
number of base configuration
set option:
indicate or configure parameter for new base conf iguration
parameter: text string
<[x … ]x>
parameter for new base conf iguration
parameter: text string
<[x … ]x>
value assigned to
status option:
displays information concerning the status of board configuration
save option:
saves the current settings
undo option:
ignore current settings and use saved settings again
DESCRIPTION: This command is used to configure external interfaces available on the COMe-bP5020’s connectors.
The “sconf info” command shows the possible configurations as well as the currently selected conf igura-
tion.
The active configuration is indicated using the “sconf status” command.
To conf igure external interfaces, select a base configuration via the “sconf select” command. Then, the
parameters can be def ined more exactly via the “sconf set” command.
To apply the conf iguration, invoke the “sconf save” command then perform a module powercycle (a hard-
ware reset is not suff icient to activate the new configuration).