2 supported mibs, 1 enterprise mib, 2 switching package mibs – Kontron AT8402 User Manual User Manual
Page 70: 3 qos package mib, 3 bootloader, 2 supported mibs - 6, Enterprise mib - 6, Switching package mibs - 6, Qos package mib - 6, 3 bootloader - 6
AT8402
Software Description
Page 4 - 6
AT8402 User Guide
4.2
Supported MIBs
The Software supports the following MIBs.
4.2.1
Enterprise MIB
• Support for all managed objects not contained in standards based MIBs.
4.2.2
Switching Package MIBs
• RFC 1213 - MIB-II
• RFC 1493 - Bridge MIB
• RFC 1643 - Ethernet-like -MIB
• RFC 2233 - The Interfaces Group MIB using SMI v2
• RFC 2618 - RADIUS Authentication Client MIB
• RFC 2620 - RADIUS Accounting MIB
• RFC 2674 - VLAN & Ethernet Priority MIB
• RFC 2819 - RMON Groups 1,2,3 & 9
• RFC 2863 – Interfaces Group MIB
• RFC 3291 - Textual Conventions for Internet Network Addresses
• IANA-ifType-MIB
• IEEE 802.1X MIB (IEEE8021-PAE-MIB)
• IEEE 802.3AD MIB (IEEE8021-AD-MIB)
4.2.3
QoS Package MIB
• RFC 3289 - DIFFSERV-MIB & DIFFSERV-DCSP-TC MIBs
4.3
Bootloader
On the AT8402 Carrier board, the bootloader ‘u-boot‘ (universal bootloader) is used. The boot-
loader initializes the main components of the board like CPU, SDRAM, serial lines etc. for op-
eration. After this, kernel and application are started from flash.