5 updating the fru data – Kontron AT8940 User Manual
Page 68

Software Setup
53
www.kontron.com
(BASE Ethernet) #copy tftp://192.168.50.5/t5310-phy-BETA-1.02.tar phy-base
Mode........................................... TFTP
Set Server IP.................................. 192.168.50.5
Path........................................... ./
Filename....................................... t5310-phy-BETA-1.02.tar
Data Type...................................... FW Update
Destination Filename........................... phy-base
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
Firmware update successful...
(BASE Ethernet) #copy tftp://192.168.50.5/t5310-phyfabric-BETA-1.02.tar phy-fabric
Mode........................................... TFTP
Set Server IP.................................. 192.168.50.5
Path........................................... ./
Filename....................................... t5310-phyfabric-BETA-1.02.tar
Data Type...................................... FW Update
Destination Filename........................... phy-fabric
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
Firmware update successful...
5.5
Updating the FRU Data
Updating the FRU data is done with the "copy" command.
The update package for the FRU comes as a tar-file and is stored in the data/update path of the release
directory tree.
There are separate FRU data update packages for AT8910 and AT8940:
• t5310-fru-variant-0-BETA-1.02.tar (for AT8910)
• t5310-fru-variant-1-BETA-1.02.tar (for AT8940)
Note: please make sure, the name of the update package doesn `t extent 32 ASCIIs.
(BASE Ethernet) #copy tftp://192.168.50.5/t5310-fru-var-0-BETA-1.02.tar fru-data
Mode........................................... TFTP
Set Server IP.................................. 192.168.50.5
Path........................................... ./
Filename....................................... t5310-fru-var-0-BETA-1.02.tar
Data Type...................................... FW Update
Destination Filename........................... fru-data
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y