5 system manager – Kontron AT8940 User Manual

Page 34

Board Features

www.kontron.com

2.5

System Manager

Basic or micro COM Express ETX Modules with Type 1 connector, according COMExpress 0 R1.0 could operate
as a System Manager on the AT8910.

• Management connection to System Manager via RS232 front RJ45.

• Basic and Micro ETX use SuperIO LPC to UART Bridge

• UART switched through FPGA

• Management connection to System Manager using front 10/100/1000Base-T RJ45 management port.

• Front panel USB port

• Support of COMExpress modules up to 30W

• Additional Ethernet Connection to Base IF and redundant HUB via Dual Ethernet Controller Intel 82580DB

• 1000Base-KX to Base Switch

• 1000Base-KX to Update Channel

• Support for JEDEC SerialATA MO-297 SSD, Port 0 and Port 2

• Support for RTM SATA applications, Port 1 and Port 3

• Support of up to 2 eUSB Flash Modules

Note:

The table shows possible operating modes for each port. The actually available modes depend on
the port mapping configuration which is still under development for the AT8940.

This manual is related to the following products:

AT8910