Vmp3 netbootloader – Kontron VMP3 User Manual

Page 115

VMP3

NetBootLoader

ID 29230, Rev. 01

Page 5 - 31

29230

.01.UG.VC.050727/091440

P R E L I M I N A R Y

PCI

FUNCTION:

Display PCI information

SYNTAX:

pci

DESCRIPTION:

The command “pci” is used to display detailed information on all
detected PCI devices. The bus number, device number, function
number, vendor, and device ID’s are displayed together with the
configured base addresses and the assigned IRQ number.

FUNCTION:

Set or display the serial port parameters (format)

SYNTAX:

pf [ [][/[]

…[/[][/]]]]

where:

command

parameter: string: “term” or “ser0”
defines serial port to be configured where:
term = SP4 and ser0 = SP6

parameter: value: numeric: “300, 600, 1200, 1800,
2000, 2400, 3600, 4800, 7200, 9600, 19200,
38400, 115200”
defines the baud rate for the port

parameter: value: numeric: “7” or “8”
defines the number of bits per character

parameter: string: “n” (none), “o” (odd), “e” (even)
defines parity to be used

parameter: value: number: “1”, “2”
defines number of stop bits