7 commands, 7 commands - 16, Netbootloader vmp3 – Kontron VMP3 User Manual

Page 100

NetBootLoader

VMP3

Page 5 - 16

ID 29230, Rev. 01

29230

.01.UG.VC.050727/091439

P R E L I M I N A R Y

5.7

Commands

The following commands are available with the NetBootLoader. Where an ellipsis (…) appears
in the command syntax it means that the command is continued from the previous line. Ob-
serve any spaces that may be between the ellipsis and the remainder of the command.

ABORT

FUNCTION:

Terminate the NetBootLoader boot operation

SYNTAX:

abort

DESCRIPTION:

This command is used by the operator to terminate the boot
operation during the boot wait time to allow the operator to perform
other NetBootLoader operations. To be asserted it must be issued
during the boot wait time which is indicated by the alternating
assertion of the MC6 (LED1) signal.

FUNCTION:

Set or display the parameters of the boot wait function of the
NetBootLoader

SYNTAX:

bw [| -f]

where:

command

parameter: value: seconds

0, 1, 2, 5, 10, 20, 50

-f

option:

force CRC update