Kontron VSBC-32 - Manual (Page 87)

VSBC-32 Serial Interface Piggybacks
ID 21168, Rev. 04 Page B - 7 © PEP Modular Computers GmbH
4.2.1 SI-10BT Jumper Settings
Default settings are in italics.
Default settings are in italics.
Default settings are in italics.
Table B-4: Jumper J1 – Squelch Threshold
Setting Descirption
Open Normal
Set 4.5dB reduced threshold
Table B-5: Jumper J2 – Link Test
Setting Descirption
Open Link Test enabled
Set Link Test disabled
Table B-6: Jumper J3 – Shielding
Setting Descirption
Open Unshielded, 100 ohm termination
Set Shielded, 150ohm termination