ETS-Lindgren 2181 Turntable - Manual (Page 13)

Specifications | 13
3.0 Specifications
Electrical Specifications
Drive Speeds: Variable
Nominal AC Voltage: 200–230 VAC
Input Frequency: 50/60 Hz
Current Rating: 15 amp service
Current Draw: < 10 amps
RPM: 0.5 – 2.0
Phase: Single (1)
Mechanical Specifications
Diameter:
2.0 m
6.56 ft
3.0 m
9.84 ft
4.0 m
13.12 ft
5.0 m
16.40 ft
Nominal Height
Minimum:
44.78 cm
17.63 in
44.78 cm
17.63 in
44.78 cm
17.63 in
44.78 cm
17.63 in
Maximum:
46.99 cm
18.50 in
46.99 cm
18.50 in
46.99 cm
18.50 in
46.99 cm
18.50 in
Required Pit
Diameter:
202.56 cm ± 0.64 cm
79.75 in ± 0.25 in
302.6 cm ± 0.64 cm
119.12 in ± 0.25 in
402.6 cm ± 0.64 cm
158.5 in ± 0.25 in
504.83 cm ± 0.64 cm
198.75 in ± 0.25 in
Top
Construction:
Sectional
aluminum
Sectional
aluminum
Sectional
aluminum
Sectional
aluminum
Distributed
Load Rating:
1500 kg
3300 lb
4000 kg
8800 lb
6000 kg
13200 lb
6800 kg
15000 lb
Distributed Load Rating applies when:
• Load is evenly distributed on top;
• No point loads under 0.19 sq m (2.0 sq ft) should exceed 100 kg
(220 lb);
• And not over 28.5 kg (62.8 lb) should be applied to a 45-degree
segment at the table outer edge.