ETS-Lindgren 2181 Turntable - Manual (Page 11)

Maintenance | 11
2.0 Maintenance
Before performing any maintenance, follow the safety
information in the ETS-Lindgren Product Information Bulletin
included with your shipment.
Regularly inspect all equipment and conduct scheduled
maintenance in accordance with the factory recommendations
provided.
WARRANTY
BEFORE SERVICING: CONTACT ETS-LINDGREN
(+1.512.531.6400)—Servicing or modifying the unit without
ETS-Lindgren authorization may void your warranty. If an attempt
to service the unit must be made, disconnect all electrical power
prior to beginning. Voltages exist at many points within the
instrument that could, if contacted, cause personal injury. Only
trained service personnel should perform adjustments and/or
service procedures upon this instrument. Capacitors inside this
instrument may still be charged even when the instrument is
disconnected from the power source.
Recommended Maintenance Schedule
Regular maintenance will prolong the effective operation and reliability of your
turntable. Follow the recommended schedule for 6-month and 12-month service.
Do not perform maintenance while the turntable is operating.
6-M ONTH S ERVICE
Check the gearbox for fluid leakage. A collection of slight film is normal, but
puddles of fluid are not normal. The gearbox is lubricated and sealed at the
factory. Under normal conditions, the gearbox should not require servicing during
its life.