ETS-Lindgren 2181 Turntable - Manual (Page 12)

12 | Maintenance
12-M ONTH S ERVICE
• Lubricate the main bearing race with a grease gun containing good quality
bearing grease. The grease fittings are located inside the race, 90 degrees
apart, beneath the top. Three discharges from the grease gun in each fitting
are adequate.
• Lubricate the gear teeth with good quality grease.
Replacement and Optional Parts
Following are the part numbers for ordering replacement or optional parts for the
Model 2181 Turntable. For additional information on available replacement and
optional parts, see Model 2181 Standard Configuration on page 7.
Part Description Part Number
Turntable assembly For a list of all turntable parts, see the
drawings located in the back pocket of
this manual.
Model 2090 Series Multi-Device
Positioning Controller
2090
IR Remote Controller 707030
NEMA connectors for slip ring 103441
Schuko connectors for slip ring 103351
Service Procedures
For the steps to return a system or system component to ETS-Lindgren for
service, see the Product Information Bulletin included with your shipment.