Elecraft K3-Remote Owner's Manual User Manual

Page 7

If Windows fails to automatically install the FTDI drivers, you may download and manually install the Virtual
Com Port (VCP) drivers provided from FTDI’s website as follows:

 Unplug the K3/0-MiniUSB cable from your personal computer if it is presently connected.
 Download the Driver setup file from FTDI website (

http://www.ftdichip.com/Drivers/VCP.htm)

 Run the driver setup wizard and wait for the setup process to complete.
 Reboot your personal computer.
 Plug in the USB cable to your personal computer and K3/0-Mini.
 Using the Device Manager, verify the com port drivers installed properly.

Operating a Remote Station through your Personal Computer

Refer to the on-line instructions for the internet service you have chosen to for instructions about how to
download the proper software and operate a remote station using the K3/0-Mini. These services, such as Remote
Ham (

www.remotehams.com

) also include instructions for setting up your own remote station that you or others

may control.

The Remote Hams website provides the RCForb Client software that you can use to for integrating with a
growing number a K3-Remote systems.

The K3/0-Mini uses a compact serial protocol to control a remote K3 and supports the standard K3 serial
commands. Developers wishing to expand their remote capability offerings can find more details on the Elecraft
web site (