Elecraft K3-Remote Owner's Manual - Manual (Page 14)

14
Configuring Your Network Router (Port Forwarding)
The network router used at the remote site must be configured for port forwarding as follows. No configuration
is required at the router used at the control site.
1. With a computer connected to the remote site LAN router, open the browser and enter the router’s I.P.
address to open the router’s configuration page (Figure 10). Various makes of routers will show
different pages. The examples here show the Linksys router’s configuration pages. If you have a
Linksys router, the default URL is
http://192.168.1.1 .
Figure 10