Elecraft KXFL3 Filter Option - Manual (Page 3)

3
resistance have resistance values much too high to provide adequate protection, even after they were cleaned
and treated with special anti-static mat solutions.
Suitable anti-static table mats are available from many sources including:
 U-line (Model 12743 specified at 10 7
ohms)
 Desco (Model 66164, specified at 10 6 to 10 8 ohms)
 3M TM
Portable Service Kit (Model 8505 or 8507, specified at 10
6
to 10
9
ohms)
Tools Required
1. ESD Protection (see Preventing Electrostatic Discharge Damage, pg 2).
2. #1 size Phillips screwdrivers. To avoid damaging screws and nuts, a power screwdriver is not
recommended.
3. Soft cloth or clean, soft static dissipating pad to lay cabinet panels on to avoid scratching.
Parts Supplied
Be sure you have the following components in your kit. If anything is missing, contact Elecraft customer
support (pg 12).
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
KXFL3 Module
ESD SENSITIVE!
1 E850492
Test Antenna 1 E850543
Screw, 1/2" (13mm), Flat Head, Black 1 E700178