Fig. # 52, Step 4), Step 3) – EFCO 960 Series User Manual

Page 53: Fig. # 51, 1/4" and 1/2" glazing adaptors

lower glass unit.

accommodate setting the

the ’ear’ up as shown to

need to be installed with

NOTE AT HORIZONTAL INTERMEDIATES ONLY:

The clips H260 or H261

FIG. # 52

Apply a bead of sealant across the length of the deflector,

FOR 1/2" GLASS

setting the glass unit below.

Care should be taken to not disengage the water deflector when

The clips H260 or H261 should be installed as soon as possible
before the sealant from step # 3 can setup.

to Fig. #53 on page 52.

the vertical member’s pocket. Refer to Fig. # 51 below and

and across the bulb gasket, and the end of the deflector at

STEP 4)

9666

L129

STEP 3)

FOR 1/4" GLASS

9667

JDA 10/2000

EAR

L129

SPP8

FIG. # 51

FOR 1/4" GLASS

9667

OF SEALANT

CONTINUOUS BEAD

L129

SPP8

CONT.

PAGE 51

1/4" AND 1/2" GLAZING ADAPTORS

SECTION VIII E -

SCREW SPLINE / SHEAR BLOCK

INSTALLATION

w/ L129 WATER DEFLECTOR