Transom lite glazing adaptor, Fig. # 32, Fig. # 31 transom lite glazing adaptor – EFCO 960 Series User Manual

Page 43

FIG. # 32

JDA 10/2000

SECTION VI - DOOR FRAME INSTALLATION

SFP6

W127

W115

FIG. # 31

TRANSOM LITE GLAZING ADAPTOR

CUT LENGTH FORMULA FOR TRANSOM
APPLIED GLAZING = D.L.O. - 1/16"

PAGE 41

(CONT.)

9673

9674

APPLY A CONTINUOUS BEAD
OF SEALANT VERTICALLY
TO SET THE ADAPTOR INTO.

1/2"

GLASS BITE

APPLY SEALANT AS SHOWN

AT HEAD AND TRANSOM BAR

AND 1" EACH WAY IN THE

GLAZING BULB TRACK

IT IS NOT REQUIRED TO REMOVE THE EXTRUDED
DOOR STOP IN THE TRANSOM AREA TO APPLY THE

TRANSOM GLAZING ADAPTOR. THE ADAPTOR WILL
APPLY OVER THE FIN STOP.
THE FIN STOP WILL HAVE TO BE NOTCHED AT THE TRANSOM BAR.

TYPICAL JAMB

MEMBER

PERIMETER MEMBER

AT HEAD CONDITION

SHEAR BLOCK ATTACHED

11/16"

D.L.O.