Detex CNV Trim - Manual (Page 6)

For Thru Bolt
(for 01 trims see
Mark Bottom Hole
step number 8)
Fasten Backplate
to Pullplate
Be sure to Engage Cam
Not Shown for Clarity
Cam Orientation Label
to Tailpiece on Backplate
Page 6
Pull with PFH Screw
Finished Washer)
(Be Sure To Use
Fasten Bottom of
For 01 Trims
when Installing Trim Plate
Position Tailpiece Vertically
12
Measure from the
Device Centerlines
Installing the Trim
10
13
PlaceTrim Unit onto
Exterior Door Face.
11
Continue with Exit
Hardware Instructions
Trim Plate Using
Screw Provided
of Pull To The
Fasten The Top
8-1/2"
7 8
Marked Drill 3/8"
Once Hole is
Thru Hole.
9