Detex CNV Trim - Manual (Page 4)

Fasten Backplate
to Pullplate
Fasten Bottom of
(Be Sure To Use
Finished Washer)
Pull with PFH Screw
Page 4
Installing the Trim
Mark Bottom Hole
to Tailpiece on Backplate
Not Shown for Clarity
Cam Orientation Label
Fasten The Top
Trim Plate Using
Screw Provided
of Pull To The
10
step number 8)
For Thru Bolt
(for 01 trims see
7
Be sure to Engage Cam
Continue with Exit
Hardware Instructions
(1/2" max) Thru Hole.
9
Once Hole is
Marked Drill 3/8"
8-1/2"
8
For 01 Trims
Exterior Door Face.
PlaceTrim Unit onto
12
13
Position Tailpiece Vertically
when Installing Trim Plate
Device Centerlines
Measure from the
11