Salter Brecknell 304BP - Manual (Page 7)

7
CHAPTER 3: OPERATION
3.1 DISPLAY
The Model 304-BP series scale utilizes a 6 character LCD (Liquid Crystal Display) to
display the weight and system information.
3.1.1 LIQUID CRYSTAL DISPLAY (LCD)
Figure 3-1 shows the display detail of the 304-BP Series. The display consists of 6 numeric
characters, weight units and system status flags. Table 3-1 lists the various
annunciators you may see and their meanings.
dwtoz
lb pcs
gGN%
CU MR Mem APW ozt ct
Stable
LowBat
-> 0 <-
FIGURE 3-1: 304-BP Display Detail
Annunciator MEANING
-> 0 <- Center of Zero annunciator. Indicates that the scale is at gross zero.
Low Bat Indicates a low battery condition. Check / replace the batteries.
Stable This light is on whenever the scale is stable.
MR Indicates that the scale is briefly displaying the contents of the memory accumulator.
Mem Indicates that there is a value greater than zero in the memory accumulator.
APW Indicates that the scale is displaying the APW (Average Piece Weight) in grams of
the items you are counting.
ozt
Indicates that the scale is currently weighing in troy ounces.
ct
Indicates that the scale is currently weighing in carats.
CU
Indicates that the scale is currently weighing in your programmed custom unit.
dwt, oz, lb, g,
GN
Indicates the unit of measure the scale is currently weighing in.
pcs, %
Indicates that the scale is currently in piece count (pcs) or percentage mode (%).
TABLE 3-1: 304-BP Series Annunciator Definitions