AVer ExpressGo - Manual (Page 94)

88
 IP Camera Relay
Set to enable/disable the relay operation when the alarm is activated.
 Play Warning Sound
Play alarm sound. To setup click Detail (see also Chapter 3.9.1 ).
 Send E-mail
Send an electronic text message. To setup click Detail (see also Chapter 3.9.2 ).
 File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol). To setup click Detail (see
also
Chapter 3.9.3 ).
 Start Recording
Record the video from the selected camera. To setup click Detail (see also Chapter 3.9.4 ).
 SMS (Short Message Service)/MMS (Multimedia Messaging System)
SMS transmits only text messages to mobile phone. MMS transmits text messages and
images over wireless networks using the wireless application protocol (WAP). Make sure your
mobile phone support this feature and your PC is connected to GSM/GPRS modem. To setup
click Detail (see also
Chapter 3.9.5 ).
 PTZ preset point
Position the PTZ camera based on the preset point setting. To setup click Detail (see also
Chapter 3.9.6 ).
 Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is activated. To setup
click Detail (see also
Chapter 3.9.7 ).
 Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated (see
also
Chapter 3.9.8 )