AVer ExpressGo - Manual (Page 26)

20
2.1.5 To Setup the IP PTZ Camera
1. In the PTZ control panel, click Setup.
2. When the PTZ Setup dialog box appears, the Auto Substitution is enabled in default.
3. To configure manually, mark Use PTZ and un-mark Auto Substitution.
4. Next, select the camera number.
5. In the Connection Settings section, select the Protocol and Model that is brand of IP PTZ camera
and enter the IP or URL of IP camera in IP Camera Site column. Mark the Authentication box if
ID and Password is required when connecting to IP PTZ camera. And then, click Save to keep
the settings.
6. In the Preset Setting section, use the control panel and adjust the position of the PTZ camera and
select the preset number to assign a number for the PTZ camera current position.
i
The numbers of preset position are depended on the IP camera protocol has supported.
7. Set the DwellTime (1-60 sec) for how long the IP PTZ camera stays in that position before it
moves to the next one. If you want to add description, check the Show Preset Name box and in
the Preset Name text box, type the word. After is done, click Save to keep the settings.
8. Repeat step 5 & 6, if you want to save another IP PTZ camera position.
9. Restore AutoPan Time: set a time period for restoring auto path function after the IP PTZ
camera has been moved. Mark the check box and set the time period in second. Set the AutoPan
Speed if the IP PTZ camera that user has used is supported.
10. Others: Enable/disable Using Joystick such as USB joystick device.
Use to adjust
the lens of PTZ
camera for
preset position
setting.