beautypg.com

Ip camera pnp setup, Chapter 3.2.2 – AVer ExpressGo User Manual

Page 72

background image

66

3.2.2

IP camera PnP Setup

To connect AVer IP camera series without any configuration; just easy as plug and play.

i

-

The IP camera PnP setup now supports AVer series IP camera.

-

The IP camera must be in factory default setting. To reset back to factory default

setting, please refer to user manual of IP camera.

1. Please make sure the IP camera is reset to factory default and is installed properly on your LAN

network.

2. Click IP Cam Pnp setup button.

3. IP Cam Pnp Setup dialog, the Search Total Channel displays number of Aver IP cameras were

found by ExpressGO system.

4. User can select the channel to connect the AVer IP cameras that were found by ExpressGO

system. If there are available channels, the channels will be marked as a suggestion for IP camera

connection.

5. Click OK to connect the IP camera. User should see the video displays on the channel screen.