AVer ExpressGo - Manual (Page 64)

58
(5) Use IPCAM motion detection
Enable to use the motion detection function of IP camera if the IP camera has support motion
detection and the motion recording will based on IP camera
’s motion detection setting.
(6) IP Camera Setup
 Add IP Camera: In the Add IPCam window, select to connect by using Protocol or URL, and
then, enter the required info. If the IP camera IP address is available, enter the IP address at
IP Camera Site column. If IP camera requires user identification, enable Authentication
check box and enter ID and Password. To enable audio, click Enable Audio check box. If you
are not sure of the Protocol or URL info, please refer to the IP camera manual or contact your
IP camera local distributor. Click Save & Exit to save the setting and leave the setup window,
but no connection with IP camera. To connect IP camera, click Connect button.