AVer ExpressGo - Manual (Page 39)

33
Chapter 3 Customizing the NVR System
In the Preview screen mode, click Setup option to customize your NVR. When the ExpressGO
configuration setup selection appears, select and click the buttons you want to change the setting.
3.1 System Setting
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory setting.
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour
data, the system automatically replaces the oldest data. In case you have more than one storage path,
the system automatically saves the data to the next storage path. By default the data is stored in
C:\Data, to insert another storage path, click Add. To remove the selected path, click Delete.