AVer ExpressGo User Manual

Page 77

(5) Network Time Synchronization

Adjust the NVR system time same as network time server. Fill in the Time Server IP address or

domain name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis.

Or, user can click Synchronize Time Right Now to adjust time right away.

(6) Remote Control Server

Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port

in Port column. The default value is 5555.

User also can manually run this function. To run, click Start > Programs > DVR > Remote
Control Server. The

remote control server icon appears on the taskbar when the

remote control server is enabled. (also see

(7) Network Video Configuration

Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling

adjust bar to set the Quality level and FrameRate level.

(8) 3GPP

Enable 3GPP that allows user to use browser on the mobile phone to view recorded video. Just enter

http://DVR Server IP/3GPP

on the browser of mobile phone, and then, user will receive the recorded

video from DVR server. Fill the RTSP PORT for 3GPP connection. Select the video size for

transmit

ting to user’s browser on the mobile phone.

(9) Other Configuration

 Enable White List

An access permit list for the remote accessing of NVR server. Enter the IP address and click Add.

Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP and click

Delete button. To reset the input, click Clear button.