AVer ExpressGo User Manual
Page 66
60
After clicking the camera, user can configure IP camera
’s IP, Mask, Gateway, and Web
port. Also, user can change camera
’s IP mode – DHCP or Static IP.
In Host Setting section, it displays current DVR
system’s IP, Mask, and Gateway.
After configuring, click OK and the new setting will write into the IP camera.
Detail: In Camera Setting interface, click Detail to configure more parameters of the IP
camera. Click OK to save the configuration and exit the setup window. To reset the
configuration back to factory value, click Default.
i
Detail setting only available for IP camera.
User can select Video size, Frame rate, Video Quality Mode and Quality of camera. And
scroll the bar to adjust the Brightness, Contrast, and Sharpness of the camera.
Preview Setting: preview setting will relate to the Save Original Format.
- Decode key frame for Preview: When previewing video, NVR system only shows key
frame and one frame per second.
- Enable live display performance optimization: The live video performance will be
optimized while display.
- Enable update when motion: The video will update only when compare the key frame
has motion found, and then, the video will be displayed.