To use the emap – AVer ExpressGo User Manual
Page 22
16
2.1.2
To Use the Emap
1.
Click Emap.
2.
In the Emap screen, click the camera icon to switch on the area where the camera is located on
the map and to display the video at the upper right corner of the Emap screen. At the lower right
corner of the Emap screen, it lists all the warning message.
3.
To control relay, right-click relay icon and select status (on, off, or trigger) of relay.
4.
To view different Emap, click Emap number button (1 ~ 8).
5.
Click X to close Emap screen.